Hello, welcome to visit Keystone valvesEnglishChina

National Service Hotline:0755-23014220

News ListLocation:HomeNews List

Ball valve features and advantages

Release date:[2017-04-15]     Click rate:

The characteristics of the ball valve

One; wear; because the hard seal ball valve is the alloy steel spray, the seal is alloy steel surfacing, so hard seal ball valve in the switch will not produce too much wear. (Its hardness factor is 65-70):

Two; sealing performance; due to the seal of the hard seal ball valve is used artificial grinding, until the spool and seal ring can be used in order to fully use. So his sealing performance is reliable.

Three; switch light; as a result of hard seal ball valve ring at the bottom of the spring so that the seal ring and the spool firmly together, so the outside force exceeds the spring preload when the switch is very light.

Four; long life: has been widely used in petroleum, chemical, power generation, paper, atomic energy, aviation, rockets and other departments, as well as people's daily lives.

Pneumatic ball valve compact structure, reliable sealing, simple structure, easy maintenance, sealing surface and the spherical surface is often closed, not easily eroded by the media, easy to operate and maintenance, for water, solvents, acids and natural gas and other general working medium, In the cut-off or connected to the pipeline in the medium, can also be used for fluid regulation and control.

Pneumatic ball valve compared with other types of valves, with angular travel torque, open quickly, stable and reliable, wide range of applications, as well as the following advantages.

1, thrust bearing to reduce the stem friction torque, the stem can be long-term operation smooth and flexible.

2, anti-static function: in the ball, stem, between the valve body set the spring, the switch can produce static electricity derived.

3, due to PTFE and other materials with good self-lubricating, and the ball friction loss is small, so the use of pneumatic ball valve long life.

4, the fluid resistance is small: Pneumatic ball valve is the valve in all the classification of the smallest fluid resistance, even a reduced diameter pneumatic ball valve, the fluid resistance is also quite small.

5, stem seal is reliable: As the stem is only imitation and movement without lifting movements, stem packing seal is not easy to damage, and the sealing capacity increases with the pressure of the medium increases.

6, the valve seat sealing performance: the use of PTFE and other elastic materials made of seals, easy to seal the structure, and pneumatic valve valve sealing capacity increases with the media pressure increases.

The advantages of the ball valve

1. Fluid resistance is small, full diameter ball valve basically no flow resistance.

2. Simple structure, small size, light weight.

3. Close and reliable. It has two sealing surface, and the ball valve sealing surface material widely used in a variety of plastic, good sealing, can achieve a complete seal. In the vacuum system has also been widely used.

4. Easy to operate, open and close quickly, from full open to full clearance as long as the rotation 90 °, easy to remote control.

5. Easy maintenance, ball valve structure is simple, the seals are generally active, demolition and replacement are more convenient.

6. When fully open or fully closed, the ball and the valve seat sealing surface and the media isolation, the media through, will not cause the valve sealing surface erosion.

7. Applicable to a wide range of diameter from small to a few millimeters, large to a few meters, from high vacuum to high pressure can be applied.

8. As the ball valve in the opening and closing process has a wipe, it can be used for suspension of solid particles in the medium.

High precision, expensive, high temperature should not be used, such as impurities in the pipeline, easily blocked by impurities, resulting in the valve can not open.


Welcome to contact us

0755-23014220

Mobile website